background image

Page - 8 

 

Operator Manual – XR 1001 Crossover 

Copyright© 2012 – Ashly Audio Inc. 

 LIMITED WARRANTY (USA ONLY) 

(Other countries please contact your respective distributor or dealer.) 

For units purchased in the USA

, warranty service for this unit shall be provided by ASHLY 

AUDIO, INC. in accordance with the following warranty statement. 

ASHLY AUDIO, INC. warrants to the owner of this product that it will be free from defects in 
workmanship and materials for a period of FIVE years from the original-date-of-purchase. 
ASHLY AUDIO INC. will without charge, repair or replace at its discretion, any defective 
product or component parts upon prepaid delivery of the product to the ASHLY AUDIO, INC. 
factory service department, accompanied with a proof of original-date-of-purchase in the form 
of a valid sales receipt. This warranty gives you specific legal rights, and you may also have 
other rights, which vary from state to state. 

EXCLUSIONS: This warranty does not apply in the event of misuse, neglect, or as a result of 
unauthorized alterations or repairs made to the product. This warranty is void if the serial 
number is altered, defaced, or removed. ASHLY AUDIO, INC. reserves the right to make 
changes in design, or make additions to, or improvements upon, this product without any 
obligation to install the same on products previously manufactured. 

Any implied warranties, which may arise under the operation of state law, shall be effective 
only for FIVE years from the original-date-of-purchase of the product. ASHLY AUDIO, INC. 
shall be obligated to only correct defects in the product itself. ASHLY AUDIO, INC. is not liable 
for any damage or injury, which may result from, or be incidental to, or a consequence of, such 
defects. Some states do not allow limitations on how long an implied warranty lasts, or the 
exclusion, or limitation of incidental or consequential damages, so the above limitations or 
exclusions may not apply to you. 

OBTAINING WARRANTY SERVICE: 

For warranty service in the United States, please follow this procedure: 

1) Return the product to ASHLY AUDIO, INC. freight prepaid, with a written statement 
describing the defect and application that the product is used in. ASHLY AUDIO, INC. will 
examine the product and perform any necessary service, including replacement of defective 
parts, at no further cost to you. 

2) Ship your product to: 

ASHLY AUDIO, INC.  

Attention: Service Department 

847 Holt Road 

Webster, NY 14580-9103

 

 

 

Introduction - 2 

XR Crossovers – 3 

Connectors & Cables – 3 

Physical Description - 4 

Installation – 5 

Typical Applications - 6 

Troubleshooting - 7 

Dimensions - 7 

Specifications - 7 

Warranty - 8 

 

Introduction - 2 

The PE Series - 3 

Physical Descriptio

Installation – 5 

Operation – 7 

Troubleshooting - 8

Spec Table - 9 

Measurements - 10

Dimensions - 11 

Warranty - 12 

 
 

 

Summary of Contents for XR-1001









Reviews: