ELECTRICAL
FUSE REPLACEMENT
Isolate the vehicle electrical supply and remove the failed fuse.
DO NOT USE ANY METAL OBJECT TO REMOVE A FUSE IT
COULD CAUSE A SHORT CIRCUIT.
Ensure the new fuse is of the same rating as the one shown on the
optare fuse/relay layout drawing, this is located within the vicinity
of the fuse/relay board.
NEVER REPLACE A FUSE WITH ANOTHER OF A HIGHER
RATING, THIS COULD CAUSE DAMAGE OR EVEN A FIRE.
In addition, there are two main fuses located behind the battery
access panel below the emergency door on the exterior of the
vehicle.
FUSES
The vehicles fuses are located behind the rear bulkhead centre
panel (photo).
Through the two access doors, undo and remove the four centre
panel retaining nuts and lift the panel clear for access to the
fuses.
31
