background image

Engl

is

h

5

Press the Windows key and tap successively on 

Settings

System

 and 

Power

.

Tap on the 

Advanced

 tab. This tab allows you to ask for the 

receiver to switch automatically to Suspend mode if it 
stays idle for the period of time you choose. You may 
choose a different setting depending on whether the 
receiver is powered from the internal battery or from an 
external power source.

Tap 

OK

 to save the settings and return to the previous 

screen.

 

Setting Time & Date

 

Press the Windows key and tap successively on 

Settings

,and 

Clock & Alarms

.

On  the 

Time

 tab, select your time zone and then enter the 

local date and time.

Tap 

OK

 to save your settings.

 

Regional Settings

It’s a good idea to customize your receiver so that it complies 
with a number of local preferences, such as country’s 
currency, decimal point representation, time and date 
formats, etc.

Press the Windows key and tap successively on 

Settings

System

 and 

Regional Settings

.

On  the 

Region

 tab, select your country.

Use the other tabs to set your local settings:

– Number format

– Currency choice

– Time and date formats

Tap 

OK

 to save the settings and return to the Today screen.

 

Locking the

Screen and the

Keypad

At some stage in your work, you may need to lock the receiver 
to make sure no user intervention from the screen or keypad 
can affect the work in progress. 

Press the Windows key.

Summary of Contents for MobileMapper 10



























Reviews: