SETTING UP:
POWER SUPPLY
Your digital drum will run on either batteries or via a power adaptor. Follow the instructions
below according to the power source you intend on using.
USING AN AC ADAPTER:
Connect the adapter to the DC IN
jack located on the rear panel of
the unit and plug into power outlet.
Do not use adapters other than
what is specified. The technical
specifications for the power adapter
on the Ashton EDP420 is 12V DC.
USING BATTERIES:
1. Open the battery compartment
cover on the underside of the unit.
2. Insert 6 x alkaline “C” sized, R 14,
SUM-2 or equivalent batteries. Use
the polarity instructions (negative
and positive guide).
3. Close the battery compartment.
- Page 2 -
SETTING UP:
USING HEADPHONES
Alternative to using the internal speakers or an
amplifier. You may choose to drum using headphones.
To do this, simply connect a pair of headphones to the
¼” stereo output jack located on the back panel of
the unit (see back panel description). The headphone
output may also be used to link the device to other
external devices.
Note: the internal speakers on the device will cease to function once the device senses an
input into the headphone output.
