Ashton EDP450, Operating Manual

Reverb

Record

Press [ reverb ] button to enter  reverb  function.  In this 

menu, the digit on far left of  LED  will display letter  

'

R

'

.

The two digits on the right will display current reverb level. 

The button 

 can be used to adjust the reverb 

level (0-3, not loop). This value will be auto-saved after 

adjusted.

VALUE [+]/[ ]

-

 Prepare to Record

Select the desired song, drum kit, tempo, drum off setting, 

and reverb settings.

Start Recording

Press the [rec] button, the light start flashing.

Press the [start/stop] button or strike the pad, the light stop 

flashing and the recording process starts.

Stop Recording

To stop recording, press the [start / stop] button or [ rec ] 

button. The record indicator will turn off. If the memory is 

full, "FL" will appear on the display and recording process 

stops automatically. 

Note: When you start recording, the vocal metronome also 

starts to count. But the sound of the vocal will not be record. 

To stop the metronome, press the [click] button.

Playback

Press the [play

/

stop] button will start or stop playing 

recorded song.

Note: When you record a new song, it will replace the previous 

recording.

The song data recorded will be lost when you turn off the power.

12

Operation

OPERATION

Reverb

Press [reverb] button to enter reverb function. In this
menu, the digit on the far left of LED will display letter ‘R’.
The two digits on the right will display current reverb level.
The button VALUE[+] / [-] can be used to adjust the reverb
level (0-3, not loop). This value will be auto-saved after
adjusted.

Playback

Press the [play/stop] button to start or stop playing
recorded song.

Note: When you record a new song, it will replace the 
previous recording. The song data recorded will be lost 
when you turn off the power.

Record 

Prepare to Record

Select the desired song, drum kit, tempo, drum off setting,
and reverb settings.

Start Recording

Press the [rec] button, the light will start flashing.
Press the [start/stop] button or strike the pad, the light  
will stop flashing and the recording process starts.

Stop Recording

To stop recording, press the [start / stop] button or [rec]
button. The record indicator will turn off. If the memory is
full, “FL” will appear on the display and recording process
stops automatically.

Note: When you start recording, the vocal metronome also
starts to count. But the sound of the vocal will not be 
record. To stop the metronome, press the [click] button.

12