ASSEMBLY INSTRUCTIONS
Thank you for purchasing this quality product. Be sure to check all packing material carefully
for small parts that may have come loose inside the carton during shipment.
TOOLS REQUIRED (NOT PROVIDED):
PHILLIPS SCREWDRIVER
NO.
DESC
Q'TY
A
HEADBOARD
1 PC
B
FOOTBOARD
1 PC
C
BED SIDE RAILS
2 PCS
D
CROSS BAR
1 PC
E
BED SLATS
4 PCS
F
HEADBOARD POST
（
L + R
）
2 PCS
G
SUPPORT LEG
4 PCS
H
CONNECT PANEL
2 PCS
NO.
DESCRIPTION
SKETCH
SIZE
Q'TY
a
Allen Key
4 x 74 x 29mm
1 PC
b
Bolt
∮
1/4"x 15 x 45mm
12 PCS
c
Spring Washer
∮
1/4"x
∮
11x 2mm T
16 PCS
d
Flat Washer
∮
1/4"x
∮
18 x 2mm T
16 PCS
e
Bolt
∮
1/4"x 15 x 38mm
4 PCS
g
STRAIGHT ALLEN KEY
4*100mm
1 PC
NO.
DESCRIPTION
SKETCH
SIZE
Q'TY
f
Screw
#8 x 30mm
8 PCS
STEP 1: ATTACH CONNECT PANEL (H) TO HEADBOARD POST (F) AND HEADBOARD (A) BY USING ALLEN KEY (a), BOLT (b), SPRING WASHER (c) AND FLAT WASHER (d).
STEP 2: ATTACH CROSS BAR (D) TO THE HEADBOARD POST (F) BY USING ALLEN KEY (a), BOLT (e), SPRING WASHER (c) AND FLAT WASHER (d).
STEP 3: HANG SIDE RAILS (C) TO THE HEADBOARD POST (F) AND FOOTBOARD (B).
STEP 4: ATTACH SUPPORT LEG (G) TO SLATS (E) BY TURNING CLOCKWISE.
STEP 5: ATTACH SLATS (E) TO SIDE RAILS (C) BY USING SCREW (f).
IMPORTANT NOTE:
1. HARDWARE BAG FOR HEADBOARD IS PACKED WITH HEADBOARD.
2. HARDWARE BAG FOR FOOTBOARD AND SLATS IS PACKED WITH FOOTBOARD.
Made In Vietnam
Page 1 of 1
EXCLUSIVE AMERICAN SIGNATURE DESIGN-DO NOT REPRODUCE WITHOUT WRITTEN PERMISSION
HARDWARE LIST FOR FOOTBOARD AND SLATS
HARDWARE LIST FOR HEADBOARD
ITEM NO.: 2650-21H/21F/21R
QUEEN BED W/REGULAR FOOTBOARD & RAILS
PARTS LIST
SKETCH
