AMERICAN SPECIALTIES, INC.
441 Saw Mill River Road, Yonkers, NY 10701
(914) 476.9000 • (914) 476.0688
www.americanspecialties.com
THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE
SAFE-Dri™ - HIGH SPEED ANTI-LIGATURE HAND DRYER (PAGE 1 OF 2)
MODEL №:
0198-MH
ISSUED:
6/2015
REVISED:
22 Feb 2016
SPECIFICATION
Recess Mounted Hand Dryer for Anti-Ligature Security applications shall operate automatically from IR sensor
that shall activate dryer when hands are placed in sensor zone. Cover and hand drying chamber shall be 18 gauge
type 304 stainless steel alloy 18-8. All exposed surfaces shall have satin finish and shall be protected during
shipment by PVC film easily removable after installation. Cabinet shall be 20 gauge corrosion protected steel
with a 1/2" [13] wide perimeter trim to lay flush against wall and shall have flush pin-hex security screws to close
cover. Motor and heating element shall have internal resetting automatic thermal protection.
Fixed directional air
vanes shall be heavy duty, rust proof and tamper resistant. Air intake slots shall not allow access to internal parts.
Circuitry shall have self-adjusting time-out and fail-safe off protection controlled by a microprocessor that shall
detect and reject false signals and shall automatically self-calibrate to provide uniform sensitivity over its entire
life span. Entire unit shall be internally electrically grounded. Dryer unit shall have approval and be listed under
the re-examination services of Underwriters Laboratories, Inc. Unit shall be warranted against defects in materials
or workmanship for five (5) years. Owner’s Manual (OM) and Mounting Template Installation Guide (MT & IG)
are supplied with unit.
SAFE-Dri
™
- High Speed Anti-Ligature Hand Dryer shall be Model
№
0198-MH of American Specialties,
Inc., 441 Saw Mill River Road, Yonkers, NY 10701-4913