AMERICAN SPECIALTIES, INC.
441 Saw Mill River Road, Yonkers, NY 10701
(914) 476.9000 • (914) 476.0688
www.americanspecialties.com
THIS MANUFACTURER RESERVES THE RIGHT TO MAKE CHANGES IN DESIGN OR DIMENSIONS WITHOUT FORMAL NOTICE
MODEL №:
ISSUED:
REVISED:
IMPORTANT: READ THESE INSTRUCTIONS COMPLETELY PRIOR TO BEGINNING
INSTALLATION. SAVE FOR FUTURE REFERENCE.
INSTALLATION OF MOUNTING HARDWARE
Appropriate wall reinforcement must be prepared prior to initiating the Velare™ BTM System installation.
Install the mounting plate on wall using six (6) № 12 self-threading, pan-head screws (by others) ( Fig. 1) into appropriate anchoring and
wall reinforcements (Fig. 2). Hang cabinet on wall mounting hanger hook (Fig. 3). Suggested mounting height is to position bottom of
module 16" [406] to 20" [508] above vanity top so bottom aligns with Model №’s 0661-X or 0663-X on either side of Filler Module (Fig.
4). Install two (2) №12 self-tapping locking screws (by others) into appropriate anchoring to prevent unit from being lifted off hanger
hooks (Fig. 2).
0661-FM-14
VELARE™ BTM SURFACE MOUNTED FILLER MODULE INSTALLATION GUIDE (PG 1 of 2)
FIG. 1
FIG. 2
FIG. 3
FIG. 4
18 MAR 2019
