Asist AE9BS06DN, Instructions For Use Manual

ADDITIONAL SAFETY INSTRUCTIONS

Please read these safety instructions before use and 

keep them in a safe place.

! - This symbol indicates the risk of injury or damage 

to the device.

• The multifunction sharpener can run continuously for 

a maximum of 10 minutes and then must cool down 

for at least half an hour.

• The multifunction sharpener is suitable for dry focu

-

sing and must never come into contact with liquids.

• The multifunction sharpener can only be used to 

sharpen HSS (high speed steel) drills, knives and 

shears with straight edges, straight and chisel blades.

• Sparks are generated when focusing. Keep the 

washer at a safe distance from flammable liquids and 

materials.

• Be careful not to touch the grindstone and proce

-

ssed material immediately after use, as they are very 

hot.

• If the processed material turns blue during the 

sharpening process, it is overheated and may be 

damaged. When sharpening, cool the regularly proce

-

ssed material, eg with water.

• The multifunction washer can be used only when the 

adapter is installed.

• The adapter must not be removed or mounted when 

turning the grindstone.

- Use protective equipment against noise, dust and 

vibration !!!

SAVE THESE SAFETY INSTRUCTIONS !!!

 DESCRIPTION (A)

The universal grinding station is designed for shar

-

pening and grinding tools (drills, scissors, knives, flat 

chisels, chisels, etc.).

The machine may only be used for its intended pur

-

pose. Any other such overuse does not correspond to 

the intended use. The resulting damage or injury of all 

kinds is the responsibility of the user / operator and 

not the manufacturer.

Please note that our devices have not been designed 

for commercial, craft or industrial use, depending on 

their intended purpose. We do not accept any liability 

if the device is used in trade, craft or industrial enter

-

prises and in comparable activities.

1 Mains plug

2 Attachment for sharpening knives and scissors

3 On / Off switch

4 Spacer

5 Support plate

6 Attachment for sharpening chisels and planing 

knives

7 Adjusting the angle

8 Protective cover

9 Workbench mounting holes

10 Grinding wheel

11 Drill sharpening attachment

12 Nuts for fixing the drill

13 Lever

14 Drill holder

15 Adjusting tray

16 Grinding wheel nut

Pictograms

Pictograms on the product packaging:

a) Power supply values

b) Power consumption

c) Idle speed

USE AND OPERATION

ASIST tools are intended for home or hobby use only.

The manufacturer and importer do not recommend 

using this tool in extreme conditions and under high 

loads.

Any additional requirements must be the subject of 

an agreement between the manufacturer and the 

customer.

Always make sure that the tool is switched off and 

unplugged before starting work or making any ad

-

justments to the appliance.

The delivery includes three sharpening / grinding 

attachments:

Attachment for sharpening knives and scissors

Attachment for sharpening chisels and planing knives

Drill sharpening attachment

The attachments serve as guides and enable precise 

and safe grinding and sharpening of tools.

Never use the sanding station without the attachment 

attached for sharpening.

Always wait for the grinding wheel to stop before 

removing the sharpening attachment.

STORAGE OF ATTACHMENTS

On the sides of the sanding station, there are guide 

rails that are used to store sharpening attachments 

when not in use.

Insert the unnecessary extensions from above into 

the guide rails on the sides of the station.

CONSTRUCTION

Place the machine on the work surface so that the 

grinding wheel points towards you. Attach the machi

-

ne to the work surface using the workbench mounting 

holes and screws (not included).

ASSEMBLY OF FOCUS ATTACHMENTS

Before mounting the attachments, make sure that the 

device is switched off.

1) Slide the required sharpening attachment from 

above into the guide rails over the grinding wheel.

2) Slide the attachment downwards until you hear it 

37