USER MANUEL
RDR 417
USB contactless reader
ASK R&D
Réf. : RD-MU-050179-10
9 / 13
Copyright ASK SA - 2006
3.3
Reader connection to USB
Caution:
The RDR417 is an USB powered reader.
Because of its high RF power, it has to be imperatively connected to a native USB port of a
computer, or a self powered USB hub able to deliver up to 500mA according to USB standard.
To avoid improper operation:
Prefer connection to a rear USB port directly handled by the motherboard.
Avoid use of USB extension cable.
Avoid replacement of the existing 1 meter USB A to miniB cable by a longer one.
Note:
Some PCMCIA USB2.0 extension boards for handheld computers are not able to deliver 500
mA.
3.3.1 Driver installation
Connect the reader to the proper USB port.
Windows will detect it as a new device.
Insert the installation CD, and follow the instructions on screen.
You will be asked to choose between:
Standard virtual COM driver,
Card reader ASK (dll) proprietary driver,
or PC/SC driver.
Chosen driver will depend on the customer application software requirements.
3.3.2 Software
The RDR is delivered by default with an embedded application firmware called CSC which
supports the ASK cards and C.ticket
families.
This firmware is upgradeable by download.
The external LEDs of the reader can be controlled by customer applicative software using
CSC software commands. On power on, red led is active.
Complete driver installation, furnished demonstration software, and tools for customer
application software development are described in a specific “software user manual”
document.
