background image

 

Before You Use                                                                       

RTV7805VW(RoHS) is a VDSL (Very High Speed Digital Subscriber Line) residential 

gateway which allows ethernet connectivity for indoor residential or office 

installation. It provides Wi-Fi 2.4GHz 802.11 b/g/n and voice over IP function for 

home or office users. To benefit users’ access to the Internet, VDSL port and 4 fast 

Ethernet LAN port are equipped with this gateway. 

The router provides a cost-effective ADSL / ADSL2 / ADSL2+/ VDSL2 router. It 

allows bidirectional communication with the ADSL / ADSL2 / ADSL2+/ VDSL2 

DSLAM over a single conventional Unshielded Twisted Pair (UTP). The subscriber 

line interface will carry the normal POTS telephone service, frequency multiplexed 

with the upstream and downstream ADSL/ VDSL signals. For VDSL configuration, 

the VDSL-POTS NT can receive up to 100Mb/s@VDSL2 in the downstream 

direction and can send up to 50Mb/s@VDSL in the upstream direction; but largely 

depending on circumstances.    In the downstream direction (with data services 

provided by a Remote Access Node) the ADSL/ VDSL NT will extract ATM cells 

from the ATM cell stream and, based on their VPI/VCI, forward these cells towards 

the Ethernet, or wireless interface. In the upstream direction, the ADSL/ VDSL NT 

will insert ATM cells into an ATM cell stream and using a DMT (Discrete Multi Tone) 

approach, convert these cells to a signal that can be sent over the subscriber line. 

On the outgoing subscriber line, the DMT signal is frequency multiplexed with the 

telephone service. Merging is done in an external splitter or built in filter 

Now users can enjoy various bandwidth-consuming applications via 

RTV7805VW(RoHS) residential gateway. 

Unpacking                                                                             

Check the contents of the package against the pack contents checklist below. If 

any of the items is missing, then contact the dealer from whom the equipment was 

purchased. 

 

 

Summary of Contents for RTV7805VW



















Reviews: