Options
Settings
Super rinse adds two extra rinses.
On/Off
Super rinse
8.
Activated in the following programmes:
Normal wash
ECO wash
Daily wash
Plastic wash
Lower half wash
Upper half wash
Activate the setting High temperature to improve the dishwashing
results. Energy consumption is slightly increased.
On/Off
High temperature
9.
Activated in the following programmes:
Normal wash
ECO wash
Daily wash
Plastic wash
Quick Pro wash
Lower half wash
Upper half wash
Built-in water tank.
On/Off
Water save
10.
Before deactivating the water tank, run a self-cleaning programme.
See Self-cleaning in the chapter Using the dishwasher.
Adjusting the water softener. Select a setting depending on the
hardness of the water supply. It is important that this setting is
correct!
0/1/2/3/4/5/6/7/8/9
Water hardness
11.
Recommended
setting
French water
hardness scale
German water
hardness scale
0
0-9°fH
0-5°dH
1
10-14°fH
6-8°dH
2
15-20°fH
9-11°dH
3
21-25°fH
12-14°dH
4
26-34°fH
15-19°dH
5
35-43°fH
22-24°dH
6
44-52°fH
25-29°dH
7
53-70°fH
30-39°dH
8
71-88°fH
40-49°dH
9
89°fH
50°dH
Do not forget to put salt in the salt compartment after you have
set the water softener to 1 - 9.
For a water supply with a hardness under 6°dH (9°fH), select 0.
The water softener is deactivated and no salt is needed.
Select whether the interior light is to be switched on when the
dishwasher is turned off and the door is opened. (If the main power
switch is turned on, the interior light is always switched on when
the door is opened.)
On/Off
Interior light at power off
12.
To exit the dishwasher's Settings menu, select Exit and confirm
your selection with the mode selector
.
Exit
14
