3. Secure the anti-tip device using the screws as
shown in the picture.
4. Attach the plastic cups for mounting the tumble
dryer’s front feet to the washing machine’s top
cover. This is essential, as only when the
tumble dryer’s feet are resting in the plastic
cups can you be sure that the tumble dryer is
correctly positioned on the washing machine.
Break off tab A on the cup fitted on the right
side and tab B on the cup fitted on the left side.
Then remove the paper from the self-adhesive
surface under the plastic cups.
A
B
A
B
5. Fit the plastic cups so that the "tags" marked
with arrows are against the front edge or side
edge of the cover and press them firmly onto
the cover. Then break off the remaining tabs.
6. Push out the knock-out hole on the back of the
tumble dryer (you don't have to completely
remove the knockout, just fold it up far enough
for the stacking bracket to fit inside the slot)
using a hammer and a screwdriver.
7. Push the tumble dryer in under the metal
brackets. While doing this, keep the front edge
raised by 0,4" (10 mm) to 0,8" (20 mm).
8. Lower the tumble dryer’s front feet into the
plastic cups and adjust the tumble dryer to
ensure it is level.
Customer Care Center
22
1-800-898-1879
www.askousa.com
Installation instructions
