13
Washing
1. Auto
This program automatically adjusts the length
of the main wash and the number of rinses to
the amount and type of laundry loaded in the
machine.
2. Stain prog
For information on stain removal see the Advice
and Tips section before washing.
• Press the programme selector (the big arrow)
again to access the stain symbol. Select
the appropriate stain type by turning the
programme selector.
• Press the programme selector (the big arrow)
again to access the fabric symbol. Select the
desired fabric type.
• Follow the dosage recommendations on the
detergent package.
•
For stains of Red wine, Tea/Coffee,
Blueberry and Chocolate we recommend
that you also add half the recommended
amount of detergent to the pre-wash
compartment.
• You can select the temperature freely, so use
the highest temperature recommended for
each garment.
3. Time program
This program adjusts itself to the specified time
frame or finish time. When using this program, it
is however important to select a temperature and
time suited to how soiled the laundry is. The spin
speed can be selected freely.
4. Heavy
Programme for heavily soiled laundry, with
dirt that needs to be fully dissolved before the
main wash. A pre-wash is used to do this. The
machine adapts the programme time and water
consumption to the load size.
5. Standard cotton
40 °C
60 °C
Program for normally to heavily soiled
laundry, whites and colors. You can select
the temperature freely, so follow the washing
instructions for each garment. 60 °C is a good
temperature for heavily soiled cotton garments,
as well as for garments worn next to the skin.
Select 40 °C if the laundry is less soiled. The
spin speed can be selected freely. The machine
adapts the program time and water consumption
to the load size.
You select a programme by turning the programme selector. The name of the selected programme
is highlighted and the finish time of the programme appears on the display. Start the programme by
pressing the Start/Stop button, or press the button in the middle of the programme selector to go on
and select options.
5
Select the programme
Selector
Dooropening
Start/Stop
Display