11
SECTION 1 BT PRO LCD
BT+ (Brain Tuner Plus):
Our most popular
and useful Program!
BT+ (Fig 9) is the basic function and includes these frequencies:
0.5Hz, 1.5Hz, 5Hz, 7.83Hz, 10Hz, 100 Hz , BT11.
It outputs a bi-polarity equal pulse width square waveform.
Timer selections are from 5 to 60 minutes.
5 EASY STEPS TO OPERATE:
1)
Press POWER (8) key to power up the machine.
2)
Use UP (7) / DOWN (6) key to select function BT+.
3)
When BT+ is displayed, press SELECT (5) key.
4)
Use UP (7) / DOWN (6) key to select frequency (Fig 10). See next page for frequency infor-
mation.
When correct frequency is displayed press SELECT (5) key again.
5)
Use UP (7) / DOWN (6) key to select the amount of minutes you want the program to run
for. (Fig 11). When correct time is showing, press SELECT (5) key to start the program.
Fig 9
Fig 10
Fig 11
While the program is running, the timer counts down in seconds (Fig 12).
Press UP (7) / DOWN (6) key for intensity adjustment. Level of Intensity is indicated on the
bar above the time display. It will always begin low, each press will increase the intensity
gradually. To avoid discomfort be careful not to turn it up too high.
Press SELECT (5) key to pause or continue program. When program is paused, timer will
stop counting down until the Select key is pressed to continue.
Fig 12
Frequency selected
Time selected
Intensity level
Time remaining
