20
BB Zapper continued: Zapper Electrodes:
It is very important to drink at least 3-4 glasses of filtered or purified water (even dis-
tilled water) during the zapping process. This will help to flush your system and allow
“detoxification” to occur. YOU MUST DRINK PLENTY OF WATER WHILE ZAPPING or
you will not detoxify your body correctly.
It is important to place the electrodes correctly otherwise zapping will not be effective.
Keep the space between the electrodes dry.
Connect the electrodes to your wrist as specified, plug lead into
‘output’
BEFORE switching
unit on. We suggest setting the intensity to ‘low’ to begin.
Everybody will have a different skin resistance, so people will ‘feel’ different effects. The differ-
ent ‘intensity’ settings will accommodate most people. BE AWARE – you may not always ‘feel’
the zapping effect. This does not matter, the frequencies WILL be received, it’s just that your
body will have adjusted its’ own skin resistance as a reaction to the zapping.
Insert the silver electrodes into the cotton sleeves. Mix up a small amount of purified water
with sea salt and wet the cotton sleeves with this solution. This is a saline solution which will
aid with conductivity between the electrodes and your skin. Do not place the electrodes on
bare skin as they may irritate.
Set up:
Connect the silver electrodes to the wrist first following the steps above.
Turn POWER (8) on, scroll up or down to BBZP and press SELECT (5)
Select desired time by scrolling up or down and press SELECT (5)
The program will now begin. Be aware that the intensity will be fully DOWN at the begin-
ning (for safety reasons), press the UP (7) arrow to increase the intensity to a comfortable
level (each press will increase the intensity).
The unit will switch off automatically after the timer has finished.
Place the Velcro wriststrap on the wrist
Slide the silver electrodes under the Velcro and place over the
radial and ulnar arteries (where your pulse is located)
