25
SAHM: (Sacred Harmony)
Another very popular and user friendly program.
Sacred Harmony frequencies represent the Earths’ natural energy grid frequencies and are
closely related to musical harmonic frequencies. The built in frequencies of the Sacred Harmony
are:
UT: 396 Hz
RE: 417 Hz
MI: 528 Hz
FA: 639 Hz
SOL: 741 Hz
LA: 852 Hz
Set up:
Switch power on and press up/down arrows to select “SAHM” (fig 31), press SELECT to start
the program. The output is a bi-polarity equal square waveform. Each step, will display
correspondent output frequency’s name and double dots will flash when program is running.
Press UP (7) / DOWN (6) to change output intensity.
Each frequency will run for one minute and move to the next etc and then it will repeat
continuously. This program has no timer control and will run non-stop until actively switching
the unit off to cease the function.
By pressing SELECT during each sequence, the frequency will remain current and frequency
title will flash. Press SELECT (5) again will skip to next frequency and LCD screen will display
corresponding frequency title as well (fig 32).
Fig 31
Fig 32
Please note: Make sure that The BLACK TMS unit (24 volt) is used with the MagnaCoil. Any
other voltage will void warranty!
The Frequency carrier is the MagnaCoil (the Magnacoil can also be used with Chakra Balance
and Sleepmate). Plug the stereo patch cord into the ‘Output’ of the main device and plug into
the ‘Input’ of the TMS amplifier. Plug the MagnaCoil into the ‘Coil’ output of the TMS amplifier
(fig 33). Place the MagnaCoil on or next to the body during a session.
Fig 33
Stereo patch lead
From ‘Output’
on BT Pro to ‘INPUT’
on TMS
BT Pro LCD with
‘SAHM’ selected
Magnacoil
plugs into
“COIL” on TMS
24 volt Power
Supply for
TMS adaptor
