2–10
Advanced Configuration (Expert Users Only)
PlugLAN 8350 Wireless SmarTAP Installation and User’s Guide
Restoring Backup Settings
If you used the procedure under
Backing Up Configuration Settings on page
to back up the configuration settings for your PlugLAN 8350 Wireless
SmarTAP, you can use the
Restore Backup
page to restore the backup settings
if necessary (for example, if they become corrupt). To display this page, click
System
in the Web Management utility menu bar and then click
Restore
Backup
in the navigation panel.
Figure 2-12: Restore Backup Page
To restore settings from a previous binary configuration file you backed up:
1. Click the
Browse
button on the Backup Settings page.
2. When the Choose file dialog box appears, locate the binary configuration
file, select it, and click the
Open
button. The name of the file appears in
the
Browse
field.
3. Click the
Restore
button. The precautionary message in
appears, warning that any default settings you changed will be lost.
Figure 2-13: Restore Warning Message
4. Click the
OK
button to restore the settings (or click
Cancel
to retain the
current settings). If you restored the configuration settings, a message
tells you that your PlugLAN 8350 Wireless SmarTAP is resetting. After the
reset completes, the Welcome page appears.
NOTE:
To log in to the Web Management utility after restoring settings, use the
user ID and default case-sensitive password associated with the configuration
settings you restored.
