Asoka® User Guide
PlugLink PL7667-ETH
Page 21 of 33
1.
IP Address
The IP Address is the internal IP address of the PL7667. The default IP address is 192.168.1.254.
To access the PL7667 Setup Interface, type this IP address into the address or navigation bar
of your web browser. This address can be changed if needed. To change the IP address,
type in the new IP address and click Apply.
The IP address you choose should be a non-routable IP. Examples of a
non-routable IP are:
192.168.x.x (where x is anything between 0 and 255)
10.x.x.x (where x is anything between 0 and 255)
2.
Subnet Mask
A Subnet Mask allows you to break down what appears (logically) to be a single large
network into smaller ones, which reduces network overhead.
Powerline
The PL7667-ETH allows you to configure the Powerline network encryption key to talk to other
Powerline devices on your network.
To scan and view a list of Powerline devices on your network, simply go to POWERLINE in the
main menu and select Device Scan in the sub menu.
