Asoka® User Guide
PlugLink PL7667-ETH
Page 29 of 33
3.
In about 15 seconds the POWER light will change from flashing green to solid green and
the PLC ACT (Power line Communication Activity) light will turn solid green (flashing green
when there is data traffic) indicating they are synchronized with the same NEK.
4.
To add more PlugLink devices; simple repeat this process per device.
5.
Congratulations, you are done!
Figure 8-2: Three devices of PLC
Notes:
1.
The other devices already in the Power line network with the proper NEK are not
affected and do not need to be reconfigured.
2.
If you disconnect power from any device, its NEK value will remain and will not default
back to “HomePlugAV” NEK.
3.
An adapter can only generate a private key once. To replace a private key, first reset
the unit back to its factory defaults by pressing the Firmware Default Reset (FW RST)
button for 1 second, then follow the procedure above.
