Asoka® User’s Guide
PlugLink 9950 Cable/ DSL Router PL9950-BBR
Page 31 of 43
Chapter 11
PL9950-BBR Administration
System Details
The System Details section is where you can set the time zone, enter a new administrative
password, enable remote management and turn the
NAT
function of the router on and off.
Setting or Changing the Administrative Login Information
The PL9950-BBR Router ships with a default user ID and password. If you wish to change the
password for greater security, you can set a password here. Write down your password and
keep it in a safe place, as you will need it to log into the PL9950-BBR Router in the future.
Figure 11-1: System Password Screen
Setting or Changing the Powerline Network Access Login Information
The PL9950-BBR Router ships with a default Powerline Network Access password. This password is
needed to configure the Powerline settings of the PL9950-BBR in the
LAN
section. By default, the
Powerline Network Access password is PlugLink. If you wish to change the Powerline Network
Access password for greater security, you can set a password here. Write down your password
and keep it in a safe place, as you will need it to log into the PL9950-BBR Router in the future.
Figure 11-2: Powerline Network Access Password Screen
