Asoka® User’s Guide
PlugLink® 9850 IP Camera PL9850-CMS
7
Unique device password
Device MAC address
IP address
Serial number
Note: For future convenience, please write this information down on your Warranty
Support Information card.
Figure 3-4: Product label
The Bottom Panel
The bottom panel contains another mounting bracket and a RESET button. The RESET
button is what you will press if you need to reset the camera. Using a long, thin object
(such as a stylus or the end of a straightened paper clip), press the RESET button and
hold it in for five seconds.
Note: Resetting the camera will erase all of your settings. Do not reset the camera if
you want to retain your configuration settings.
The below table lists the factory default settings of the camera:
Table 3-2: Factory Default Settings
Default IP address
192.168.8.100
Administrator User Name
admin
Password admin
View Only User Name
User
Password User
NOTE: User Names/Passwords are case sensitive.
