11
2. IP Search searches all the network devices which connect to the intranet and lists
on the window. Click
[Search]
button to search again.
3. From the list, click and select the device with the MAC Address that corresponds to
the device that is to be configured.
4. The network configuration of the selected device will show on the bottom, filling in
the Device Name, IP Address, Subnet Mask, Gateway and the others.
5. Click
[Modify]
button to save the settings into the device.
6. Wait for few seconds to let the device update the settings, and then click
[Search]
button again to re-search the network devices.
7. Double-click the network device listed on the window, It will open an IE browser and
connect to this device directly.
