52
Motion Detection
This device allows 3 areas for detect motion. When motion detection is triggered, it
can send the video or snapshot to specific mail address; transmit the video or
snapshot to remote FTP server or Samba network storage; trigger the digital out.
Set the Area:
To set up or clear the motion area, click
[Draw/Clear Area]
button on
“Set Area” row, and then use mouse to drag the area on the video.
Adjust the Sensitivity:
To adjust the sensitivity of detection, select the level from the
pull-down list.
Activate Motion Detection:
To activate the motion detection, enable the
[Detect
Area]
check box
Actions when Motion Detection is Trigger:
Select what actions will be taken once
the motion detection is triggered in each area.
E-mail: When the motion detection is triggered in this area, send the recorded
video or snapshot to the specific mail address.
