SAFETY PERCAUTIONS:
This device is not intended to use by individual with restricted physical, sensor or mental capacities
or those with lack of experience or knowledge, including children, unless they are supervised by
an individual who is responsible for their safety or have received training in operating the device.
Store the appliance and package material out of reach of children!
1) Always connect ultrasonic cleaner to AC220V/50Hz electricity outlet.
2) Warning: This product works at high voltage, do not use it in humid locations to avoid
electric shock.
3) Handle ultrasonic cleaner with care. Do not hit or throw the appliance to prevent damage
and impairment of performance and life span of it.
4) Perform cleaning of the appliance only after the power supply is disconnected.
5) Do not open the casing of the appliance to avoid any hazardous situations, as it works at
high voltage.
6) Do not use the ultrasonic cleaner if the power plug or power cord are damaged.
7) Remove the power plug from the socket before cleaning the machine or filling the liquid, if
the device is not going to be used for a long time or if a malfunction occurs.
8) Do not leave the machine plugged in electricity unattended.
9) Do not repair or make changes to the ultrasonic cleaner on your own. Always call authorized
service if there is a problem with the appliance.
10) During normal operation of ultrasonic generator, a consistent sound is resulted from the
harmonic oscillation of the tank body impacted by ultrasound waves. In case of discontinuous
oscillation, increase or reduce level of the cleaning fluid by a small quantity to achieve
consistent sound, which will facilitate better cleaning of the item.
11) Long-term consecutive operation of ultrasonic cleaner may result in high temperature
inside the unit and accelerate aging of electronic components in it. Comply with time limit
recommendations.
12) Do not use inflammable cleaning agents in the tank!
13) Do not operate ultrasonic cleaner without fluid in the tank, as it may result in fire.
14) Always fill atleast 2/3 of the tank and maximum up to MAX line on tank.
15) Do not place the ultrasonic cleaner on a soft or other surface where ventilation will be
blocked.
16) Prevent splash of cleaning fluid or water into the ultrasonic cleaner body, as it may cause
short circuiting, and thereby damage appliance.
17) Any foreign matter falling into the tank should be taken out immediately.
18) Before changing or discharging the cleaning fluid, make sure the fluid is at normal
temperature and the ultrasonic wave generator is shut down and the power supply is
disconnected.
19) Clean the tank and casing of the ultrasonic cleaner with soft dry cloth after disconnecting
the power cable. Remove any dirt in the tank after operation.
e: prodaja@avene.si
