Thank you for purchasing ultrasonic cleaner. Please take the time to red these
operating instructions before use and retain them for future reference. Failure to
follow these instructions may lead to serious personal injury and damage to property.
PREAPARATION:
Carefully unpack the cleaner and remove all traces of packing materials
from it. Visually inspect the cleaner for any parts may have become loose or damaged during
transport.
USAGE:
1) Open the lid and fill the stainless steel tank with liquid.
Note: Running machine with ought water will damage the cleaner!
2) Place items into water, the items should be completely covered by water. Do not exceed
“MAX” level.
3) Close the lid and plug machine into power outlet.
4) Press the “ON” button, the red indication light will be on for 180 sec during ultrasound
opesration. After 180 seconds ultrasound and light will turn off.
5) Press “RESET” button restart timer for another roudn of 180 seconds. Press “OFF” button
to stop the machine.
6) When cleaning is completed, unplug the power cord, remove the lid and retrieve
the items. Pour the water out through the pouring recess. Clean and wipe the tank.
WARNING: Ultrasound opertion generates heat. Unit needs to cool down for 30 minutes after
15 minutes of operation. Do not throw objects in the tank as it may cause damage.
www.asonic-ultrasoniccleaners.com
On the top of control panel is red LED indicator light for utlrasound operation. In the middle are
„ON” and „OFF” buttons fora activation and deactivation of ultrasound. On the bottom is the
button ”
RESET” which will reset the timer to starting value of 180 seconds.
e: prodaja@avene.si
