3.10.1 Add a new Routing Table
1
The default setting is changed after you press the Change Default button.
Please press the Routing Table button again to show the new setting. (see
figure 3.15)
F
IGURE
3.15: E
DIT AND
A
DD A NEW ROUTING TABLE
Index – Define the number of this data.
Prefix – Define the number you dial. You could just define the first digit of
the numbers
Destination – Define the destination of this rule. There are three directions
of the destination.
E164 – Define a right E164 number of the destination you want.
For example: There are two FXO ports of the gateway (2S2O) and I want the
first FXO port (1002 is the default E164 number) to be the destination. So the
E164 number I have to define is 1002.
Min Digits – The minima digits you dial.
Max Digits – The maxima digits you dial.
40
The min and max digits are the range for the number you dial. For example:
The min digits is 1 and max digits is 10. The call will follow this routing if the
number I dial is between 1 and 10 digits. If I dial over 10 digits, this call will
follow the default routing.
