3.12 IP Packet ToS
The Type of Service should be worked with the network router. The router will
check all the packets if it support the TOS function. There is a field in the packet
for the TOS value. This WEB is for users to configure these values to make the
packets with the correct values for the TOS service from the gateway. (see
figure 3.18)
Figure 3.18:TOS Configuration
According to the RFC 1349 document, the TOS value as following :
1000 – minimize delay
0100 – maximize throughput
0010 – maximize reliability
0001 – minimize monetary cost
0000 – normal service
These values are the Binary format. Please change to the Decimal and put
these values in to the correct table.
43
