-rtp RTP port number (2326~65532). Default : 16384
Example:
sip -px 210.59.163.171 -line1 70 -line2 71 -line3 72 -line4 73
usr/config$
Parameters Usage:
-print
print current h323 related settings
-mode alternatives for proxy or peer-to-peer mode (1=proxy mode;
0=peer-to-peer mode). If users select proxy mode, a valid proxy is
needed when Gateway is in operation.
-----------------------------------------------------------------------------------------------
usr/config$ sip –mode 0 (peer to peer mode)
-px
to assign the ip address of the proxy when Gateway is in proxy
mode.
-domain to assign the domain name of the proxy when it is needed.
-prefix this will be prefix the alphabets before the sip line number.
-line1
assign the port 1 number.
-line2
assign the port 2 number.
Note:
User can also set “x” in line number to disable the port. If the port is
disabled, it can only receive calls but not calling out.
Note:
1. This is for 2FXO unit, for 4FXO and 6FXO model, there will be line1 to
line4 or line 1 to line6.
2. No matter in Proxy or P2P mode, user only needs to dial line number to
reach local port.
For example, in P2P mode, user wants to dial from the
Line1 to local Line2, only need to dial number of line2.
-expire It just like the TTL function in H323, the gateway will make sure the
registration is success or not for a period times.
-port
define the local sip port for this gateway.
-rtp
to allocate RTP port range—NOT RECOMMENDED. This may be
used when RTP port range conflicts with Firewall policy. (each port
62
