FXSO H.323 Gateway User Manual
Document Ver.: 105
Release Dec, 2004
34
3.4 Line Configuration
The Line configuration will show the status of the registrations and the ports. It
includes the hunt group, hotline, and no answer forward configuration. Press
the Line configuration button to enter configuration table (see figure 3.6)
Figure 3.6: Line Information
u
Type – Just show the interface for this port.
u
Hunt Group –Define the group number of this port. When the port is busy,
the call could be transferred to another port in the same group. Only the
same type could be configured in the same group.
u
Hotline –Enable or Disable the hotli ne mode. The hotline mode will be
enabled if you enter the hotline number. The default setting is disabled.
u
No Answer Forward –When the port didn’t answer the call, this call will be
forwarded to the number you configured. This is only for the E164 number
or the phone numbers you want to transfer.
u
Registration – To show the gateway registered on the GK or not.
Support
the GK mode only
.
u
Status – To show the port is busy or ready.
This function is only for the FXS type. The FXO type couldn’t support this
function.
