FXSO H.323 Gateway User Manual
Document Ver.: 105
Release Dec, 2004
41
u
Ring Before Answer(FXO) – This will help the users to answer the calls
from PSTN into this gateway quickly. The call will be connected by one
time ring if users configure this for 1. (From 1 to 10)
u
Delay to add DTMF(FXO) – The timer for the DTMF signal sending if the
calls are from the IP to PSTN side. It could only support the
one-stage-dialing function. (From 1 to 5s)
u
Auto connect time(FXO) – The FXO will send the connect message to the
IP side is this timer is up in the one-stage-dialing function. It could only
support the one -stage-dialing function. (From 0 to 65535s)
u
FXO type – Users could configure all the calls need the 2
nd
stage dialing
or not.
n
Normal : The 1
st
or 2
nd
stage dialing will depend on the dialing plan
from the users. If user dial the number of the FXO port, that will be the
2
nd
stage dialing.
n
Force 2
nd
dial : Every calls will need the 2
nd
stage dialing type.
u
Hardware Type – This will show the hardware detection type.
Support the
FXS/FXSO model only
.
u
Hardward Version – This function could detect the hardware version for
this unit.
