FXSO H.323 Gateway User Manual
Document Ver.: 105
Release Dec, 2004
61
3.21 Routing Table
Routing Table is a rule to define the destination of the calls you make. You
could define the rules by the number you dial or by the ports. The Routing
Table button will show you the configuration table. (see figure 3.29)
In fact, there are three directions of the incoming calls (from IP orFXSO side).
The explanation of the default routing is as below:
The location with
the incoming calls
The location with
the destination
The explanation
IP (Default)
Fxs
The destination will be the FXS port
when the calls from the IP side
without any define rules
.
Fxs (Default)
IP
The destination will be the IP side
when the calls from the FXS port
without any define rules
.
Fxo (Default)
IP
The destination will be the IP side
when the calls from the FXO port
without any define rules
.
Figure 3.29: Routing Table
u
Index – The list number of the Route Table.
