FXSO H.323 Gateway User Manual
Document Ver.: 105
Release Dec, 2004
75
usr/config$ ifaddr -sntp 1 10.1.1.1
While 10.1.1.1 stands for SNTP server’s IP address.
-timezone
set local time zone according to GMT
-ipsharing
Just put the static IP address for the WAN port of the IP
sharing if the gateway is behind this IP sharing device.
-ipchange If the unit is behind the IP sharing device and the IP address
for the WAN port of that IP sharing is using the dynamic IP
address. This function has to be enabled.
usr/config$ ifaddr –ipchange 1
-id
This id is for the user name of the PPPoE usage.
-pwd
This password is for the user name of the PPPoE usage.
-reboot
If the connection disconnected by the ISP, the unit will
reboot and get the ip again.
-echo
In the PPPoE mode, if the network connector or the ADSL
modem was lost, after the connector and modem
connected, it will reboot automatically for the re-connect
with the PPPoE server.
4.2.8 [time]
When SNTP function of FXSO GateWay is enabled and SNTP server can
be found as well, type
time
command to show current network time.
usr/config$ time
Current time is THU JUL 01 11:46:01 2004
Please make sure about that the SNTP server was configured before you
used this command.
Please contact with your vendor before you are using the ipsharing and
ipchange function.
