FXSO H.323 Gateway User Manual
Document Ver.: 105
Release Dec, 2004
96
usr/config$ tone
Disconnect tone and remote ring back tone configuration
Usage:
tone [-print][[num][freqLo ][freqHi ][freqLoLev][freqHiLev]
[Tone1ON][Tone1OFF][Tone2ON ][Tone2OFF ]]
tone -print Display tone configuration.
num Tone index(1~4=Disconnect tone, 5~8=Remote ring back tone).
freqLo Low frequency.
freqHi High frequency.
freqLoLev Low level frequency.
freqHiLev High level frequency.
T o n e 1 O N .
T o n e 1 O F F .
T o n e 2 O N .
T o n e 2 O F F .
Example:
tone -print
tone 1 480 620 1 1 50 50 1023 1023
usr/config$
Parameter Usages:
show all tone configuration
[num]
tone index. 1~4 is disconnect tone, 5~8 is remote ring back
tone.
ForFXSO ports Gateway must detect disconnect tone to
determine when to disconnect the call, so user must set
disconnect tone of PBX or PSTN network connected toFXSO
ports.
When making a call fromFXSO ports, there are 2 ways to
detect callee has already picked up the call, one is to detect
reverse signal, the other is to detect the termination of ring
back tone, so user must set ring back tone of PBX or PSTN
network.
