Dynamix DW-01Plus/H Gateway User Manual
- 16 -
2.1.3.3 Application mode-GK/Peer-to-Peer Mode
After setting IP address, user must assign Dynamix DW-01Plus/H to work under GK
routed mode or Peer-to-Peer mode. If there is no Gatekeeper, please set your Dynamix
DW-01Plus/H as Peer-to-Peer Mode.
2.1.3.3.1 GK routed mode
GK mode means that there will be an intermediate Gatekeeper between Dynamix DW-
01Plus/H Gateway and the remote entity. While operating at this mode, Dynamix DW-
01Plus/H Gateway will first register to the Gatekeeper located at the ISP side.
Step 1.
Configure the Dynamix DW-01Plus/H Gateway H323 Configuration. Click
[H323 Configuration] on the navigation panel. In the H323 Information screen,
select GK routed Mode function.
Step 2.
Set the H323 information from your service provider: Gatekeeper IP Address,
Gateway Type, Registered Prefix, Line1 Number, and click the [OK] button.
2.1.3.3.2 Peer-to-Peer Mode
Peer-to-Peer Mode allows users to call other VoIP devices without the Gatekeeper.
When in Peer-To-Peer mode, Dynamix DW-01Plus/H Gateway use Phone Book, which
will dial predefined phone number, and press
“
#
”
(optional, to accelerate the dial) as end
of dial.
Summary of Contents for Dynamix DW-01Plus/H
Page 1: ...1 ...
