Dynamix DW-01Plus/H Gateway User Manual
- 21 -
2.1.4.3 Application mode-GK/Peer-to-Peer Mode
After setting IP address, user must assign Dynamix DW-01Plus/H to work under GK
routed mode or Peer-to-Peer mode. If there is no Gatekeeper, please set your Dynamix
DW-01Plus/H as Peer-to-Peer Mode.
2.1.4.3.1 GK routed mode
GK mode means that there will be an intermediate Gatekeeper between Dynamix DW-
01Plus/H Gateway and the remote entity. While operating at this mode, Dynamix DW-
01Plus/H Gateway will first register to the Gatekeeper located at the ISP side.
Step 1.
Set GK routed Mode, using
“
h323
”
command
usr/config$ h323
–
mode 0
Mode 0 is for GK mode, while mode 1 is for Peer-to-Peer mode.
Step 2.
Set the H323 information from your service provider: Gatekeeper IP Address,
Gateway Type, Registered Prefix, Line1 Number, and click the [OK] button.
For example:
usr/config$ h323
–
gk 192.168.13.77
usr/config$ h323
–
gwtype 1
usr/config$ h323
–
prefix 798
usr/config$ h323
–
line1 7981
2.1.4.3.2 Peer-to-Peer Mode
Peer-to-Peer Mode allows users to call other VoIP devices without the GK server.
When in Peer-To-Peer mode, Dynamix DW-01Plus/H Gateway use Phone Book, which
will dial predefined phone number, and press
“
#
”
(optional, to accelerate the dial) as end
of dial.
To configure Peer-To-Peer Mode in Dynamix DW-01Plus/H Gateway, follow the steps
below:
Step 1.
Set Peer-To-Peer Mode, using
“
h323
”
command
usr/config$ h323
–
mode 1
Mode 0 is for GK mode, while mode 1 is for Peer-to-Peer mode.
Summary of Contents for Dynamix DW-01Plus/H
Page 1: ...1 ...
