Dynamix DW-01Plus/H Gateway User Manual
- 37 -
3.4 Dynamix DW-01Plus/H PSTN Line Application
3.4.1 PSTN Outgoing Call
3.4.1.1 Make PSTN call from TEL Phone set
Default TEL line is intended to make IP call, if user wants to make a call via PSTN line,
please dial
“
* #
”
, then user will hear dial tone from PSTN side. The dial tone between IP
side and PSTN are different. If the PSTN port doesn't connect a PSTN line, press
“
*#
”
,
the signal will be back to IP side then play busy tone.
3.4.1.2 PSTN Backup
If Dynamix DW-01Plus/H is working under GK mode, and fail to register to Gatekeeper,
TEL line will automatically switch relay to PSTN line, which means when VoIP system is
failed, user can still make a call from PSTN line without pressing
“
*#
”
.
3.4.2 PSTN Incoming Call
3.4.2.1 VoIP TEL is busy
Caller from PSTN side can still make a call to Dynamix DW-01Plus/H, PSTN LED will
be blanking, when user hangs up IP call, TEL phone set will ring, and user can pick up
the call from PSTN side. The Dynamix DW-01Plus/H Gateway has
“
call waiting tone
”
function, when IP side is under calling, if PSTN side has an incoming call, the user in IP
side will hear a call waiting tone.
3.4.2.2 VoIP TEL is available
When Dynamix DW-01Plus/H has incoming call from PSTN side, TEL phone set will
ring, user can pick the call from PSTN side.
3.4.3 VoIP Outgoing Call
Default TEL line is intended to make IP call, user can just pick up the phone set
connected with TEL port and make VoIP call while VoIP network system is available.
3.4.4 VoIP Incoming Call
When user is communicating with PSTN side with TEL Phone set, Dynamix DW-
01Plus/H can
’
t have VoIP incoming call.
Summary of Contents for Dynamix DW-01Plus/H
Page 1: ...1 ...
