Dynamix DW-01Plus/H Gateway User Manual
- 57 -
4.3.10 IP Packets ToS Configuration Screen
The Type of Service should be worked with the network router. The router will check all
the packets if it support the TOS function. There is a field in the packet for the TOS
value. This WEB is for users to configure these values to make the packets with the
correct values for the TOS service from the gateway.
Set Signal or RTP Packet DSCP value:
-
Default:
Select TOS value as 0
-
User Assign Special DSCP Code:
User can set other unspecified value here.
TOS/DiffServ (DS) priority function can discriminate the Differentiated Service
Code Point (DSCP) of the DS field in the IP packet header, and map each Code
Point to a corresponding egress traffic priority. As per the definition in RFC2474,
the DS field is Type-of-Service (TOS) octet in IPv4. The recommended DiffServ
Code Point is defined in RFC2597 to classify the traffic into different service
classes. The mapping of Code Point value of DS-field to egress traffic priorities is
shown as follows.
Summary of Contents for Dynamix DW-01Plus/H
Page 1: ...1 ...
