Dynamix DW-01Plus/H Gateway User Manual
- 82 -
Parameter Usages:
-
print:
Print current h323 related settings
-
mode:
Alternatives for gatekeeper or peer-to-peer mode (0=gatekeeper mode;
1=peer-to-peer mode). If users select gatekeeper mode, an extra gatekeeper is
needed when Gateway is in operation.
-
usr/config$ h323
–
mode 1 (peer to peer mode)
-
gk:
Assign gatekeeper
’
s IP address when Gateway is in gatekeeper mode.
-
algk:
Assign second gatekeeper
’
s IP address as redundancy. If Gateway fails to
register to main GK for 10 times, it will try to register to alternative GK.
-
gwtype:
Gateway type has two kinds, gateway and terminal. Gateway type: will
register as H.323 defined Gateway; user has to define [prefix] in next command.
Terminal type: will register as H.323 defined Terminal, [prefix] command is not
necessary.
-
dfgw:
Default gateway is applied under Peer-to-Peer mode. User defines a
constant default gateway IP address, then any number dialed will pass forward
to this IP Address.
-
prefix:
Assign VoIP Gateway prefix number, as well as the registered number on
the Gatekeeper.
-
line1
: Assign line 1 number.
-
passwd:
Set H.235 security password. If user
’
s GK need H.235 security token
password to authenticate, user have to input open password in this command.
-
alias:
H.323 ID. If in gatekeeper mode, this h.323 ID must be different from
others who are registering to the same gatekeeper.
-
display:
An addition name for user to recognize in called site.
-
gkid:
Set GateKeeper name for GateKeeper discovery. When Gateway send out
GateKeeper discovery message will search GateKeeper with this GateKeeper
name.
-
gkdis:
Set auto discovery function on or off. If this function is enabled and IP
address of GateKeeper is set as 255.255.255.255, Gateway will multicast to
search a GateKeeper on network with configured GateKeeper name; if IP
address of GateKeeper is set, before Gateway register to the assigned
GateKeeper, it will send out GRQ (GateKeeper Request) message with
configured GateKeeper name to GateKeeper first.
-
ttl:
To set timer for TTL (Time To Live). Gateway would send RRQ, with keep
Alive, to gatekeeper periodically according to TTL timer, default:60 (0~3600
second).
-
rtp:
To allocate RTP port range
—
NOT RECOMMENDED. This may be used
when RTP port range conflicts with Firewall policy (1024~65532).
Summary of Contents for Dynamix DW-01Plus/H
Page 1: ...1 ...
