Dynamix DW-01Plus/H Gateway User Manual
- 89 -
Parameter Usages:
-
print: Print out current contents of Phone Book. Users can also add index
number, from 1 to 100, to the parameter to show specific phone number.
Note:
Index number: means the sequence number in phone book. If users do
request a specific index number in phone book, Gateway will give each record a
automatic sequence number as index.
-
add: add a new record to phone book. When adding a record, users have to
specify name, IP, and e164 number to complete the command.
name: Name to represent caller.
e164: e.164 number for mapping with IP address of caller
ip: IP address of caller
port: Call signal port number of caller
drop : Drop e.164 number when dial out. 0 means to keep e.164 number, 1
means to drop e.164 number when dialing out.
inert: Insert digits.(1~10 digits)
usr/config$ pbook
–
add name test e164 100 ip 192.168.13.78
-
modify: modify an existing record. When using this command, users have to
specify the record
’
s index number, and then make the change.
usr/config$ pbook
–
modify 1 name test e164 5678 ip 192.168.1.10 port 1730
drop 0
-
delete: delete a specific record. [pbook
–
delete 3] means delete index 3 record.
usr/config$ pbook
–
delete 3
PhoneBook Rules:
The e164 number defined in phone book will fully carry to destination. It is not just
a representative number for destination
’
s IP Address. In other words, user dial this e164
number to reach destination, destination will receive the number and find out if it is
matched to its e164, including Line number in some particular device.
For example:
usr/config$ pbook
–
Phone book information and configuration
Index Name E.164 IP Port Drop Insert
========================================================
1 test 100 192.168.13.78 1720 Disable
usr/config$
Summary of Contents for Dynamix DW-01Plus/H
Page 1: ...1 ...
