Dynamix DW-01Plus/H Gateway User Manual
- 95 -
disable the request mode sending and 1 for request mode sending with the
T.38.
-
t38ecm:
Enable or disable t38ecm function. The function is support the error
correction in the high-speed fax mode.
-
t38asn1:
Enable or disable Enable ASN.1 function. The function is support with
the FAX.
-
faxrdd:
Set fax redundancy depth. User can increase FAX redundancy depth
when network traffic is heavy. For example, if user set fax redundancy as 2,
Gateway will resend fax packets every 2 packets.
-
fstart:
Enable or disable fstartStart function. The function is can shorten the
connection time if the opposite party also supports fastStart.
-
tunnel:
Enable or disable H.245 tunneling function. The function is send H.245
(Call Control messages) via H.225
’
s (Call Signal messages) link. The function is
effective only when both side support h245 tunnel.
-
h245fs:
Enable or disable Gateway H.245 FastStart. The function is send h.245
messages after FastStart.
-
earlyh245:
Enable or disable early H.245 function. The function is effective only
when both sides support early H.245.
-
h450:
Enable or disable H.450 related features, which include transfer, hold and
forward.
Note:
It is not recommended to change the value in this command, only if users do know
well the application. This might cause incompatibility with other devices.
For example:
Summary of Contents for Dynamix DW-01Plus/H
Page 1: ...1 ...
