Dynamix DW-PhoneLite Administration Guide
15
7. PoE Config (PPPoE Configuration)
(1) User Name
Set PPPoE connection authentication user name.
(2) Password
Set PPPoE connection authentication password.
(3) Reconnect
Select ON or OFF to enable or disable this function. If user enables this
function, after PPPoE disconnected, Dynamix DW-PhoneLite will automatically
reboot to re-connect, and after reboot, if Dynamix DW-PhoneLite still can’t
connect with server, Dynamix DW-PhoneLite will keep trying to connect. On the
other hand, if user disables this function, won’t reboot and keep trying to connect.
(4) Exit
Return to upper level of LCD Menu
8. IP-Sharing
(1)
If Dynamix DW-PhoneLite is behind IP sharing or NAT device, and
Dynamix DW-PhoneLite is under Peer-to-Peer mode or Proxy mode
(doesn’t support endpoint behind NAT function), on IP sharing must
enable
“DMZ”
function or set “
Virtual Server
” to open ports (UDP port:
5060 and 16384, 16385). Dynamix DW-PhoneLite must enable this IP
sharing function.
(2)
User must enter public IP address of IP sharing.
9. Exit:
Return to upper level of LCD Menu
6. Advanced Set (can be protected by password)
Password:
User must key in password to enter this menu if password has been set, items
under this command are all important ones, which can only be configured by
advanced users. If password hasn’t been set, user can enter this menu
directly without entering password.
Note:
1. If user forget password, please contact with your distributor, we will
generate a specific password according to your MAC address of
SIP-Phone.
2. User can also try to configure DynamixDW-PhoneLite via Telnet or Web
Summary of Contents for Dynamix DW-PhoneLite
Page 1: ......
