Dynamix DW-PhoneLite Administration Guide
36
Chapter 4 Configuring the Dynamix DW-PhoneLite through
Telnetcommand lines
After setting the IP Address of Dynamix DW-PhoneLite and reboot, (please refer to
LCD Menu: 5-3.4.5), user can enter into Telnet command lines.
Note:
1. After user enter DW-PhoneLite configuration via telnet, please use login:
”
root
”, password: null, press enter to enter command lines.
2. If user forget login password, please contact with your distributor, we will
generate one new password according to LAN Phone’s MAC address. Please
login with “mac” and this new password.
3. User must input lower-case command, but contents of configurations such as SIP
alias or user name etc, user can set as capital case.
4. After any change of configuration, please remember to do
commit
command to
save changes and then
reboot
command to reboot system.
1. [help] command
Type
help
or
man
or
?
to display all the command lists. The following figure is shown
all commands of Dynamix DW-PhoneLite.
Summary of Contents for Dynamix DW-PhoneLite
Page 1: ......
