Dynamix DW-PhoneLite Administration Guide
39
8. [time] command
When Dynamix DW-PhoneLite enable SNTP function and be able to connect with SNTP
server, type
time
command will show the current time retrieved from SNTP server.
9. [ifaddr] command
Configure and display the Dynamix DW-PhoneLite IP information.
1.
–print:
print out all current configurations of ifaddr command.
2.
-ip, -mask, -gate:
Set Dynamix DW-PhoneLite IP Address, subnet mask and default
gateway respectively.
1.
-ipmode:
Set Dynamix DW-PhoneLite network mode to be Fixed IP, DHCP or PPPoE.
When User set IP mode to be fixed IP, please set IP, subnet Mask, default gateway
as mentioned in item 2.
If User set IP mode to be DHCP, Dynamix DW-PhoneLite will search for DHCP server
to capture IP address after reboot.
If user set IP mode to be PPPoE, please remember to set related parameters under
[pppoe] command
.
2.
-sntp:
When SNTP server is available, enable Dynamix DW-PhoneLite SNTP function
and assign SNTP server IP address so that Dynamix DW-PhoneLite can capture
current time from SNTP server.
(ifaddr –sntp 1 “xxx.xxx.xxx.xxx
”)
3.
-dns:
User can set primary and secondary Domain Name Server IP address. Once
SIP-Phone can connect with DNS server, user can specify URL address instead of
IP address for Proxy Server and phone book IP address...etc.
(ifaddr –dns 1
“primary DNS server address
”
–dns 2 “secondary DNS server address
”)
4.
–timezone:
User can set different time zone according to the location Dynamix
DW-PhoneLite is. For example, in Taiwan the time zone should be set as 8,which
means GMT+8. (GMT+8:
ifaddr –timezone 8
)
Summary of Contents for Dynamix DW-PhoneLite
Page 1: ......
