Dynamix DW-PhoneLite Administration Guide
41
connect. On the other hand, if user disables this function, DW-PhoneLite won’t reboot
and keep trying to connect. (
pppoe –reboot 0/1
)
5.
–echo
: to set PPPoE send echo request function or not. Under some ISP sending
echo request will cause abnormal behavior for LAN Phone, however, if user disable
echo function, when ISP disconnect, LAN Phone will not try to reconnect. Suggest
for most ISPs this function need to be enabled. Please refer to
pppoe –reboot
function.
11. [flash] command
This command will clean the configuration stored in the flash rom to default value and
reboot the Dynamix DW-PhoneLite.
Note:
1. After user upgrade new software version, suggested to execute this command
to make sure new software work well on Dynamix DW-PhoneLite.
2. To execute the command
flash –clean,
all configuration of Dynamix
DW-PhoneLite stored in flash will be cleaned. It is authorized for the user
whose login name is “root” only.
Summary of Contents for Dynamix DW-PhoneLite
Page 1: ......
