CHAPTER 2
C
ONTR
OLS AND DISPL
A
Y
EFD1000 E5 Pilot’s Guide
Page 2-12
091-00086-001 ( )
2.2.4. Menu
The MENU button is used to access the E5 Dual EFI’s Menu to change options, and also
to change the display brightness.
2.2.4.1. Using the Menus
Press the MENU button to activate the Menu (
Ref. 3
). The current menu page name is
shown on the bottom center of the Navigation Display. Directly below the menu page
name is a segmented menu page bar, giving a graphical representation of the current
page relative to the total number of menu pages. The current menu page number is
shown in the lower right corner of the Navigation Display.
Menu Page 1, General Settings is the one most commonly used in flight. It allows
the pilot to enable or disable airspeed and altitude tapes, BARO, GPS Autocourse
and conduct AHRS resets. The other menu pages are used for Vspeeds and map
customization, EFI power management, product version information, and information
and option settings, relative to your specific equipment and installed options.
The Menu operates either in the Navigation or Edit mode, as indicated by the label
directly above the Right Knob. When the MENU button is first pressed, the Main Menu
is in the Navigation mode, indicated by the magenta label SEL PAGE directly above
the Right Knob
(Figure 2-8)
. When in the Navigation mode, rotating the Right Knob
navigates through the menu pages. Rotate the Right Knob clockwise to advance to
the next menu page, counterclockwise to return to the previous page.
Each Menu Page has up to five selectable options, each adjacent to one of the five
Hot Keys which double as Menu Keys when the Menu is active (
Item 1
of
Figure 2-9
Figure 2-8
Menu Navigation Mode