CHAPTER 4
REFERENCE GUIDE
EFD1000 E5 Pilot’s Guide
Page 4-16
091-00086-001 ( )
Set the Barometric Pressure
1. Press the BARO Hot Key.
The BARO label above the Right Knob and Barometric Pressure Setting Field appear
in magenta (
Figure 4-21
).
2. Rotate the Right Knob to change the value of the Barometric Pressure
Setting Field.
3. Press the BARO Hot Key or any knob, button/key to exit.
If no action is taken, after 10 seconds of inactivity, the label, and field are rendered
in cyan.
WARNING
Always check and set the EFI BARO whenever the
mechanical altimeter is adjusted
Figure 4-21
BARO Field Enabled
Figure 4-20
BARO Set to mB (millibars)
