CHAPTER 4
REFERENCE GUIDE
EFD1000H PFD Pilot’s Guide
Page 4-40
091-00012-001 REV C
Select the Single-Line Bearing Pointer Source
1. Press the Single-Line Bearing Pointer Button (Left Button,
Figure 4-80
) until
the desired navigation source is shown above the Button.
Select the Double-Line Bearing Pointer Source
1. Press the Double-Line Bearing Pointer Button (Right Button,
Figure 4-81
)
until the desired navigation source is shown above the Button.
Figure 4-80
Single-Line Bearing Pointer and Button
Figure 4-81
Double-Line Bearing Pointer and Button
NOTE
A VOR that is tuned to a localizer frequency is
considered an invalid Bearing Pointer source since
Localizer signals provide no bearing information.
