Aspen SPNTWB, Installation And Startup Manual

Installation and Startup Guide

Rio Rancho, NM

19

After selecting the mode and/or changing the passcode, 

select 

SAVE

 with the rotary control and press the center 

switch to save the settings.

A progress bar 

will appear as the 

settings are saved.

Press the LEFT (9:00 o’clock) button to return to the 

previous screen.

Master Reset

Hold the LEFT and UP buttons in at power up to restore 

factory default settings.

WARNING:  Master Reset will remove all stored 

settings, unlock the control panel and reset the 

passcode to five center button presses. 

Master Reset takes about 75 seconds to complete 

while the Alert LED on the front panel glows white. 

The display will then return to the Main Window and 

the power LED will light up to indicate power ON and a 

“ready” status.

Navigating Individual Settings

The following example illustrates the structure of the 

LCD screens used to set up the processor.
Select a category from the Main Screen.

A submenu will provide a list of the specific adjustments 

that can be made in that category. Rotate the scroll 

wheel to highlight the desired setting and press the 

center switch to select it.

EXAMPLE: Mic/Line Input Setup

 accesses a setup 

screen where gain values, muting, phantom power, 

polarity (phase) and delay can be adjusted.
Highlight the desired item and press the center switch 

to enter the value for this setting.  Press the center 

switch to store the new setting (item highlight is re-

moved) before selecting another item or returning to the 

previous menu.

NOTE:  Press the center switch to store the value 

(highlight is removed) before navigating to a 

different item or menu.