Aspes ALF3138, User Manual

EN - 18

2.  Spin Speed Selection 

When you select a programme, the 

maximum spin speed is automatically 

selected. 

To adjust the spin speed between the 

maximum spin speed and the cancel 

spinning option (- - -), press the Spin 

speed button until the desired speed is 

displayed.

If you have skipped the spin speed you 

want to set, keep pressing the spin speed 

adjustment button until the desired spin 

speed is displayed again.

3.  Delay Timer

You can use this auxiliary function to 

delay the start time of the washing cycle 

for 1 to

23 hours .

To use the delay function:

•  Press the delay key once.
•  “01h” will be displayed.   will light up 

on the electronic display.

•  Press the delay key until you reach 

the time after which you want the 

machine to start the washing cycle.

•  If you have skipped the delay time 

you would like to set, you can keep 

pressing the delay key until you reach 

that time again.

•  To use the time delay function, you 

need to press the Start/Pause key to 

start the machine.

•  If you want to cancel the delay:

 - If you have pressed the Start/

Pause key to start the machine, 

you just need to press the delay 

key once.   will go off on the 

electronic display.

 - If you have not pressed the Start/

Pause key, press the delay key 

continuously until   goes off on 

the electronic display.   will go off 

on the electronic display.

NOTE

: In the case that you 

want to select the auxiliary function 

feature, if the auxiliary function LED is 

not on, this means that this feature is not 

being used in the washing programme 

you have selected.

4.  Detergent Dosage Selection*

Auxiliary function button 4 Detergent Dosage Selection 

This auxiliary function allows you to 

enable or disable auto dosage and to 

adjust the amount of liquid detergent 

according to the soiling level of the 

laundry you put in your washing machine. 

5.  Softener Dosage Selection*

Auxiliary function button 5 Softener Dosage Selection

This auxiliary function allows you to 

enable or disable auto dosage and adjust 

softener levels.

*For use of this auxiliary function, please 

see the descriptions under Section.